Imet KS 450 bandsaw
A very high quality and precise machine perfectly suited for cutting substantial sections and tubular steel profiles within a bustling production setting. The distinct configuration of the bow pivot, positioned beneath the cutting table’s centerline, causes the saw blade to tilt during the completion of the cut. One must not underestimate the significance of this distinctive attribute, as it enhances the efficiency of cutting square sections and flat materials significantly compared to conventional machines. This improvement results in a substantial increase in cutting performance, prolonged blade lifespan, and reduced strain on the machine components.
KS 450, suitable to cut structural steel, pipes, profiles and beams. Mitre cutting up to 60° left and right, easy stop at 0°,45° left and 45° right.
- Very strong steel sawframe with tubular section, pulleys diameter 360 mm.
- Hard metal pads inside the blade guides. Possibility to slide the frontal vice along the work table. Wide working space to support the material.
- Mechanical device (position sensor) that allows the sawframe to lower quickly toward the material and detect automatically the start and end cut point.
- Mobile console with 3-ways selector to choose different working modalities: the return of the sawframe with steady blade, or end at the cutting cycle without the return of the sawframe.
- Cuting capacity : round till 350 mm., square till 330 mm. and rectangular till 450×320 mm.
Technical Data
Area angular cut | ° | -30 / 90 / +30 |
Cutting capacity at 90°: round / square / rectangular | mm. | 350 / 330 / 450×320 |
Blade dimensions | mm. | 4250 x 34 x 1.1 |
Blade Motor Power | KW | 1.7/2.2 or 2.2 ESC |
Blade speed | mt/min. | 35/70 or 15 ÷ 100 ESC |
Dimensions ( B x L x H ) | mm. | 900x2500x2180 |
Altezza piano di lavoro | mm. | 850 |
Weight | Kg | 865 |
Type of functioning | semiautomatic | |
Suitable for cutting: | Steel / cast iron / aluminium |
Features
Mobile ConsoleImet saws have as standard a mobile console for easy positioning of in accordance with the work to be performed. |
|
Nylon clean blade brush KSAs standard nylon blade cleaning brush powered by the movement of the drive pulley. |
|
Minimal lubrication system OPTIONALIt is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected. |
|
Hydraulic power unit KSIn KS bandsaws, the hydraulic power unit is located at the front of the column for a handy and easy access during periodic maintenance |
|
Sensor Device KSAll KS saws are fitted as standard with an approaching sensor device for automatic detection of the starting point of cutting. |
Optional Extras
Battery Laser Line (Optional):
German battery powered laser line.
Bundle Cutting Device-52 (Optional):
Hydraulic bundle cutting device for H 601 semi-automatic band saw. Maximum cutting capacity is 600x250mm, minimum 150x60mm
Micro-mist Bandsaw (Optional):
Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.
Powered Laser Line (Optional):
Imet factory fit wired laser line.
Cutting Angle Display (Optional):
It’s available as a optional the LCD display to view the set cutting angle.
Roller table Synchronisation Device (Optional):
The synchronization system between the RTP line (unloading roller conveyors) and movement of the cutting angle.
Roller tables KSRoller tables with free rolls to be used both on loading side and unloading side , with electrowelded steel structure, element of 1,5 meters, support pads and a pedestal. Fitted for the ground fixing and with possibility of regulation of the height |
|
Roller tables RTLRoller tables with free rolls to be used on the unloading side, with manual movement, length stop and reading of the measure through LCD display, the length stop slides on balls recirculation guide, available in forms from 3 meters. |
|
Roller tables RTPLoading-unloading tables with motorized movement of the length stop with the possibility to plan 10 different lengths through PLC . Movement through toothed strap and geared motor on ball recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms of 3 meters. Automatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. |
|
Roller tables with motorized rolls RTRRoller tables with motorized rolls, to be used for both loading– unloading side, driven by pinions, chain and electric motor controlled by an inverter; the management of the roller tables is performed trough a mobile push-button panel provided of: speed regulation movement, direction movement, emergency button,simultaneous or single functioning of the tables. Complete with metric rod, manual positioning with digital reading or motorized version. In the motorized version possibility to memorize up to 10 different lengths through PLC. Position sensor to slow down the run of the material and to guarantee the precision of the lengths of cut. Operation: once selected the sense of advancement of the loading-unloading tables, the operator through buttons moves the material that in proximity of the length stop will slow down automatically till the established measure. |
Roller Table Options:
Loading/unloading roller table (Optional):
Roller table compatible with both loading and unloading table with 1 leg, maximum capacity 1500kg, length 1.5m
Digital reading roller table (Optional):
Unloading roller table with digital reading and manual positioning.
Sizes Available:
RTL3KS600 Measuring length of 3m, 3 pedestals, max loading 3000kg;
RTL6KS600 Measuring length of 6m, 5 pedestals, max loading 6000kg.
Motorised length stop roller table (Optional):
Unloading roller table with length stop and selection of the lengths by means of a keyboard Available
Sizes Available:
RTP3KS600 Measuring length of 3m, 3 pedestals, max loading 3000kg;
RTP6KS600 Measuring length of 6m, 5 pedestals, max loading 6000kg.
Motorised roller table for loading side (Optional):
Loading motorised roller table with chain transmission and motor reducer managed by inverter with keyboard.
Sizes Available:
3m; capacity 3000kg
6m; capacity 6000kg
9m; capacity 9000kg
12m; capacity 12000kg
Motorised roller table unloading side* (Optional):
Unloading motorised roller table with chain transmission and motor reducer managed by inverter with keyboard.
Sizes Available:
3m; capacity 3000kg
6m; capacity 6000kg
9m; capacity 9000kg
12m; capacity 12000kg
*Excluding measuring stop.
Digital reading length stop with manual positioning (Optional):
Digital reading length stop with manual positioning. Available only together with unloading motorized roller table
Sizes Available:
3m
6m
9m
2m
CNC Motorised measurement (Optional):
CNC motorised measurement with fast approaching for automatic slowdown of the piece (only with RTR).
Sizes Available:
RR6S -measurement length 6m
RR9S – measurement length 9m
RR12S – measurement length 12m
Pair of vertical rollers (Optional):
Pair of vertical containment rollers in steel, max 2 pair every 1.5m.
Vertical roller (Optional):
Single vertical roller with 250mm to prevent falls while moving the pierce. Max 2 each 1.5m.